17 April 2012

New look pasta machine handle


After much use, the grip on the handle of my pasta machine was in a bad way. (A good tip to prevent it from falling out, when in use, is to wrap a piece of masking tape once around the end before inserting it). So I decided to repair it with polymer clay.

I used scrap polymer clay to fill the gaps and provide a base layer and baked it for half an hour 

When the final layer had been added and smoothed, I baked it for another hour, just to be sure.

1 comment:

  1. Very, very clever and pretty too! Thank you so much Claire.

    Penni Jo

    ReplyDelete